Hi people,
I have a little problem... when I am trying to obtain some profiles, if I ask for 2, 8, 15 and 26.... then at the prf file I'm obtaining the profiles for other segments.... in this case I obtain 12, 14, 19 and 27! that is quite strange....
What can I do? maybe can be one error in my control file?
Thanks;
Marina
I attach the lines of my example:
(From the control file)
PRF PLOT PRFC NPRF NIPRF
WB 1 ON 1 4
PRF DATE PRFD PRFD PRFD PRFD PRFD PRFD PRFD PRFD PRFD
WB 1 170.000
PRF FREQ PRFF PRFF PRFF PRFF PRFF PRFF PRFF PRFF PRFF
WB 1 1.00000
PRF SEG IPRF IPRF IPRF IPRF IPRF IPRF IPRF IPRF IPRF
WB 1 2 8 15 26
(from the prf file obtained running the model)
Model run at 10:07:27 on 07/21/08
36 4 182 22 23 1 1 2 T
2 8 15 26
ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF
(...)
TEMP 12
20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00
20.00 20.00 20.00 20.00
TEMP 14
20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00
20.00 20.00 20.00 20.00 20.00 20.00
TEMP 19
20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00
20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00
20.00 20.00 20.00
TEMP 27
20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00
20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00
20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00
20.00 20.00 20.00
look for tabs
Thanks, but I don't have any