You are here

Time series plot frequency

I have specified each julian date within my model period in the TSRD (NTSR = 195). the starting and ending days are 110 through 304. I set the frequency at 100.00 so that my tsr output file would have one line for each julian day. This works well for julian days 110 - 209 but then on julian date 210, the frequency in the output is 0.004 julian days for all of JDAY 210, then the tsr.opt file just lists JDAYS 215, 243, and 293. I have checked the wcon file for extaneous characters in the TSR rows. What can I do so that my TSR*.opt files give me one line for each day in the record? here is the portion of my control file TSR PLOT TSRC NTSR NITSR ON 195 4 TSR DATE TSRD TSRD TSRD TSRD TSRD TSRD TSRD TSRD TSRD 110.00 111.00 112.00 113.00 114.00 115.00 116.00 117.00 118.00 119.00 120.00 121.00 122.00 123.00 124.00 125.00 126.00 127.00 128.00 129.00 130.00 131.00 132.00 133.00 134.00 135.00 136.00 137.00 138.00 139.00 140.00 141.00 142.00 143.00 144.00 145.00 146.00 147.00 148.00 149.00 150.00 151.00 152.00 153.00 154.00 155.00 156.00 157.00 158.00 159.00 160.00 161.00 162.00 163.00 164.00 165.00 166.00 167.00 168.00 169.00 170.00 171.00 172.00 173.00 174.00 175.00 176.00 177.00 178.00 179.00 180.00 181.00 182.00 183.00 184.00 185.00 186.00 187.00 188.00 189.00 190.00 191.00 192.00 193.00 194.00 195.00 196.00 197.00 198.00 199.00 200.00 201.00 202.00 203.00 204.00 205.00 206.00 207.00 208.00 209.00 210.00 211.00 212.00 213.00 214.00 215.00 216.00 217.00 218.00 219.00 220.00 221.00 222.00 223.00 224.00 225.00 226.00 227.00 228.00 229.00 230.00 231.00 232.00 233.00 234.00 235.00 236.00 237.00 238.00 239.00 240.00 241.00 242.00 243.00 244.00 245.00 246.00 247.00 248.00 249.00 250.00 251.00 252.00 253.00 254.00 255.00 256.00 257.00 258.00 259.00 260.00 261.00 262.00 263.00 264.00 265.00 266.00 267.00 268.00 269.00 270.00 271.00 272.00 273.00 274.00 275.00 276.00 277.00 278.00 279.00 280.00 281.00 282.00 283.00 284.00 285.00 286.00 287.00 288.00 289.00 290.00 291.00 292.00 293.00 294.00 295.00 296.00 297.00 298.00 299.00 300.00 301.00 302.00 303.00 304.00 TSR FREQ TSRF TSRF TSRF TSRF TSRF TSRF TSRF TSRF TSRF 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 100.0 TSR SEG ITSR ITSR ITSR ITSR ITSR ITSR ITSR ITSR ITSR 7 7 11 11 TSR LAYE ETSR ETSR ETSR ETSR ETSR ETSR ETSR ETSR ETSR 0.00 -1.00 0.00 -1.00
Forums: 

Hi Kent, I'm not sure what's causing the problem with the write frequencies after JDAY 210, but have you set the value of NDAY in the MISCELL card of the control file to a value greater than 195? Possibly one way around the problem is the set the TSRF values to 500, rather than 100. This would allow the program to skip ahead past the end date of the simulation for each specified date, allowing only one line to be written to a TSR file for each date. chris

Thanks for the response Changing the NDAY value in MISCELL to greater than 195 cured the problem with the TSR output file. the model runs; however, I do get 193 preprocessor errors Time series segment[ITSR=-842150451] is located at a boundary segment for NTSR 3 Time series segment[ITSR=-842150451] is located at a boundary segment for NTSR 4 Time series segment[ITSR=-842150451] is located at a boundary segment for NTSR 5 .....etc............................................................for NTSR 195