You are here

Home › Forums › W2 Forum › Hydrodynamics

define two structures

Fri, 08/04/2017 - 11:04am — MostafaS
Hi, all, I have problem on model, I want to define two structures, One in the end of the water body and another in the middle of it. The model I've made shows both structures at the end of the water body. How can I solve this problem? Thanks
Forums: 
Hydrodynamics
Mon, 08/07/2017 - 10:50pm — jarosik

Hi, you must divide water body in two water bodies thus you'll have structures in the end of the water body. Jirka
Tue, 08/08/2017 - 4:26am — MostafaS

Hi jarosik, I did the same, but in plan view of w2 post, The output of the wb1 is shown in the end of the wb2.
Tue, 08/08/2017 - 4:58am — jarosik

Hi, you mast check, if you have corect in control file "Branch G"(US, DS, UHS, DHS,..) Jirka
Wed, 08/09/2017 - 2:52am — MostafaS

thank you jarosik, I also have a problem in calibrating the temperature data in part of location summary of measured data. My model has 4 branches, segments that are in branches 2, 3, and 4, are not recognized in the location summary. While in Branch 1, which is the main branch, all segments are correctly identified.
Wed, 08/09/2017 - 11:22pm — jarosik

It looks like you have stil set up of "Branch G" incorrect. Check also "GRID"(NWB, NBR)
Thu, 08/10/2017 - 5:40am — MostafaS

I also have this problem with a simple waterbody, a waterbody with two branch that I'm sure its data is presented correctly to the model. now tell me for the segment that are in the second branch, what is the equal amount of rm? And what information should be entered in the branch information of measured data. thanks alot for your help
Tue, 08/15/2017 - 2:37am — jarosik

Sorry, I don't know what you mean with amount of rm.