PRF FILE

Hi people, I have a little problem... when I am trying to obtain some profiles, if I ask for 2, 8, 15 and 26.... then at the prf file I'm obtaining the profiles for other segments.... in this case I obtain 12, 14, 19 and 27! that is quite strange.... What can I do? maybe can be one error in my control file? Thanks; Marina I attach the lines of my example: (From the control file) PRF PLOT PRFC NPRF NIPRF WB 1 ON 1 4 PRF DATE PRFD PRFD PRFD PRFD PRFD PRFD PRFD PRFD PRFD WB 1 170.000 PRF FREQ PRFF PRFF PRFF PRFF PRFF PRFF PRFF PRFF PRFF WB 1 1.00000 PRF SEG IPRF IPRF IPRF IPRF IPRF IPRF IPRF IPRF IPRF WB 1 2 8 15 26 (from the prf file obtained running the model) Model run at 10:07:27 on 07/21/08 36 4 182 22 23 1 1 2 T 2 8 15 26 ON OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF (...) TEMP 12 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 TEMP 14 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 TEMP 19 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 TEMP 27 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00 20.00